Select Page

Oil painting 

As its name suggests, is a mixture of pigment pigments that form a more or less light paste and oil. This oil is drying like linseed oil, i.e. it hardens in contact with air and light, this is commonly called drying. It appeared at the end of the Middle Ages and was a great success in the time of the impressionists.

We use gasoline to dilute it, more precisely turpentine gasoline. The oils used are linseed or carnation oil. To have good results and thus succeed in your works and avoid cracks, you will have to respect certain rules to understand and master this technique.

One of the disadvantages of oil painting is its smell, due in particular to the use of gasoline, it is advisable to work in a well-ventilated area and it is good to have a place dedicated only to this activity. It is possible to use oil paint on a dry acrylic layer but not the other way around.

If you’ve been interested in this technique, you’ve probably heard about the lean-on-fat rule. The explanation is very logical and it is important to respect this rule to avoid cracks. This consists of superimposing the layers of paint that are becoming increasingly greasy, i.e. more oil-laden. Because the drying takes place in contact with air, the lower layer must not remain soft while the upper layer has hardened.

We often start a painting with a juice: painting very diluted with turpentine oil to lay the foundations, the sketch of your subject.

Traditional method

This painting method is intended for rigorous, patient people in search of authenticity. Oil painting in its traditional practice is made up of several stages: A preparatory drawing, a sketch, one or more layers of paint, glaze and finally varnish.
First of all, draw the main lines and contours of your motif on the support; either with a fine brush of a diluted colour, such as Sienna or ochre, or with a charcoal.
Then, the roughing is carried out in a single, highly diluted shade. This step places shadows and lights.
It’s time to move on to colour. Several coats can be applied but be careful! Make sure to respect the drying time of about 2 weeks between each coat so that it hardens correctly, as well as the rule of fat on lean. The new layer must always be greasier than the previous one.
Example (there are many variations): A first layer made of a mixture of colour + medium to be painted / a second layer made of a mixture of colour + Oil.
Then, once your paint has taken the time to harden again for 2 or 3 weeks, you can now apply the glaze. A glaze is the characteristic of oil painting and it is what gives it all the nobility and depth of its tones. What was once an essential part of the profession and today is little mastered and even little known by artists, even professionals.

News

Ai Weiwei’s accessible and DIY work

Ai Weiwei’s accessible and DIY work

Ai Weiwei's creativity seems to know no bounds. This Chinese contemporary artist never ceases to arouse the curiosity and admiration of art lovers. He recently made a big impression by proposing a "100% democratic" work that each of us can create ourselves! Making art...

Contemporary Art: LG Hosts Exclusive Performance Series

Contemporary Art: LG Hosts Exclusive Performance Series

LG Electronics has brought the world of art and technology together with its ultra-premium brand, LG SIGNATURE, by sponsoring two immersive performances at the LG Arts Center SEOUL in South Korea. More info below. The best of art and technology This series of...

A glaze is a transparent color that is superimposed on another, modifies its color without covering it. The typical example is a blue glaze on a yellow background that will give green. Only the intensity of this new hue will be much more beautiful and deep than a simple green color because the rays of light pass through all the layers to reflect on the deepest one. It’s like superimposing colored glasses on top of each other.
In short, the traditional technique of oil painting is exciting, bewitching but long and rigorous. But for those who are more in the spontaneous and who need speed of execution, there is the second method: L’alla prima!

Method alla prima

By definition, painting alla prima means painting in one session, making a work in one go. “Painting in the cool” as it is called. Unlike the traditional technique, the steps of roughing and glazing are eliminated, preparatory drawing is an option, and colors are applied in a single, fresh layer. In other words, all you have to do is take your palette, your brushes and your canvas and go for it! However, to succeed, you need confidence in your actions and know where you’re going.
Tips: Start by painting the whole, the shapes and the main lines, then gradually paint the details. Take several brushes with you, this will avoid having to clean them each time the colour changes.

The drying process

This is the evaporation process. Oil being a fatty substance, nothing will evaporate, on the contrary, it traps oxygen, which increases its weight by 15%. The oils used in paints are drying, i.e. they harden in contact with air and light, it passes from a liquid state to a solid state.
If it is common to say that the paint goes through a drying phase, it must be said that in reality oil paint does not dry, it hardens. And it can take a certain amount of time, even a lot of time! This slowness has its advantages: there is time to mix colours, beautifully shaped, melted and graded, to correct mistakes and to work on certain details for several days.
In thin layers, it can take a few weeks, in normal or thick layers… several months or several years! To know that if the dough is really too thick or if the oil is not drying enough, then your painting will never dry out….
This phenomenon of drying a canvas that occurs after each brushstroke can be difficult to control, which is why it is advisable to start painting in a thin layer rather than a thick one. The surface will harden quite quickly, while in depth the paint will still be “soft”, so you will have to be careful with any movement or tension, because the crust on the surface will inevitably crack.

Brilliance

The presence of oil gives this paint a certain shine. The use of varnish allows this gloss to be uniformly applied to the painting. A matt oil painting is unnatural, it is possible but in this case the designer will look for an aspect other than all the aesthetic qualities of this technique. Some colours will shine brighter than others, in order to uniform the rendering, the application of a varnish to be retouched is sufficient once the work is finished.

Contact